Ruida Co2 Laser Cutting and Engraving Controller

2024-12-27

Co2 Laser Controller FAQ

Frequently Asked Questions Case 1

Automatically returns to home position when processing starts

Troubleshooting

1.Reset settings are incorrect
2.Reset button on control panel not working
3.Power supply is unstable or too low
4.System software is corrupted

Quick Solution Guide

First, check if the reset parameters are normal, verify whether the user parameter reset is enabled, ensure the mainboard wiring is not under-voltage, and confirm that the output port is functioning properly.

Frequently Asked Questions Case 2

The machine does not return to the positioning point after processing

Troubleshooting

1.Multiple positioning points are enabled
2.The positioning button on the panel is malfunctioning or the positioning button was not pressed to initiate positioning
3.Incorrect return position settings in user parameters

Quick Solution Guide

Check if the corresponding items are set incorrectly

Frequently Asked Questions Case 3

Laser pulse works, but no laser during cutting

Troubleshooting

1.Layer output settings are incorrect, laser enable for the layer is not turned on.
2.The laser power setting for the layer is too low.
3.Incorrect head offset settings.

Quick Solution Guide

1.Even after increasing the power, there is still no laser output, although the cutting action is normal.
2.The number of heads is set to 2, but there is actually only one laser head.

CO2 Laser Controller

CO2 Laser Vision Controller

Fiber Laser Cutting Controller

Precision Cutting Controller

Oscillating Knife Cutting Controller

Laser Height Controller

Laser Marking Controller

Intelligent Control Board

Laser Welding Controller

Laser Cleaning Controller

CO2 Laser Controller

CO2 Laser Vision Controller

Fiber Laser Cutting Controller

Precision Cutting Controller

Oscillating Knife Cutting Controller

Laser Height Controller

Laser Marking Controller

Intelligent Control Board

Laser Welding Controller

Laser Cleaning Controller

Ruida Co2 Laser Cutting and Engraving Controller

Ruida Co2 Laser Cutting and Engraving Controller